3×1 Antenna Switcher

Up to 3 antennas to 1 radio high isolation switcher.

Features:

  • Three antenna port allows switching of independent antennas for HF and 6m band.
  • 4kW power rated.
  • Input conectors are SO 239 or N type conectors.
  • Compatible with all 12V source driver band decoders. Factory preset on positive signals.
  • If needed, can be ordered with GND signals switching.
  • 4O3A style high isolation.
  • Wire controlled by a mechanical switch or Station Genius, SAC X or any other band decoder.
  • Mechanical switch, Station Genius and SAC X are not included but can be purchased separately.
  • Easy to install anywhere in the shack.
  • Unselected antenna ports are grounded.
  • Without power all antenna ports are grounded.
  • Each antenna switcher is individualy trimed and tuned for best performance.
  • Specifications:

    Characteristic impedance:

    Power handling:

    Operating frequency range:

    Relay drive voltage:

    Current consumption:

    Dimensions:

    Weight:

    Operating temperature range:

    50 ohm

    4000W

    0 to 60 MHz

    + 12V

    max. 80 mA

    W 117mm x H 42mm x D 80mm/p>

    500g

    -20 + 60 celsius

    Guaranteed power rating:

  • 4 kW CW / SWR < 1:1 in range 1.8 – 30 MHz
  • 3 kW CW / SWR < 1:2 in range 1.8 – 30 MHz
  • 2 KW CW / SWR < 1:1.3 in range 1.8 – 30 MHz
  • 2.5 KW CW / SWR < 1:1 in range 30 – 60 MHz
  • 1.5 KW CW / SWR < 1:2 in range 30 – 60 MHz
  • 1 KW CW / SWR < 1:3 in range 30 – 60 MHz